Questions? Call us toll free 1-866-840-4400
Fax (360) 350-6307

Search results for '5 x1%252C4 mm'

Items 1 to 60 of 87 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction
  1. 3 x 3 x 1.5mm N38 Nickel Plated Block Magnet

    B0303015

    3 x 3 x 1.5mm N38 Nickel Plated Block Magnet

    $0.08

    An extremely tiny square magnet. Approximately 1/8" wide by 1/16" thick. The poles are located on the 3 x 3mm surfaces. Learn More
  2. B1818

    B1818

    18 x 18 x 18mm N38 Nickel Plated Block Magnet

    This magnet is approximately 3/4 inch cube. Learn More
  3. 10x2mm nickel plated rare earth disc magnet

    D1002

    D10x2mm N38 NiCuNi Plated Disc Magnet

    This magnet is a good size for crafts and woodworking. It is small enough that it wont pinch fingers. Commonly used in magnetic badge holders or lapel pins. Holds up to 7lbs. Learn More
  4. MR16

    MR16

    D16-3.5x5mm N38 NiCuNi Plated Countersunk Ring Magnet

    This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More
  5. CSR2505

    CSR2505

    D25-4x5mm N38 NiCuNi Plated Countersunk Ring Magnet

    25mm dia. x 4mm inner dia. x 5mm thick (with 8mm dia. x 3mm deep countersink) Neodymium Countersunk Ring magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 5mm thickness Learn More
  6. 3mm rare earth disc magnet for crafts

    D03015-N52

    D3x1.5mm N52 NiCuNi Plated Disc Magnet

    $0.11

    One of our most popular Sizes. Learn More
  7. B0901

    B0901

    9 x 9 x 1.5mm N38 Nickel Plated Block Magnet

    This thin plate magnet is perfect for sewing into light fabrics. The 9x9mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This little magnet can hold up to 6 lbs. Learn More
  8. S03

    S03

    D3mm N38 Nickel Plated Sphere Magnet

    3mm dia. Neodymium Sphere Magnet - NdFeB N38 - Nickel Plated - Magnetized through 3mm diameter Learn More
  9. C0512

    C0512

    D5 x 12mm N38 NiCuNi Cylinder Magnet - DIAMETRICALLY MAGNETIZED

    This diametrically magnetized magnet was originally designed for the Melexsis MLX90316 Rotary Position Sensor IC. Cylinder magnets are usually magnetized so that the poles are on the ends of the magnet. This piece is setup so that the poles are on the sides of the magnet. This makes the magnets stack up edgewise. The side effect is that this magnet is perfect for magnetic jewelry. See our magnetic bracelet combo pack.

    Learn More
  10. MH32

    MH32

    32mm Hook Magnet - N38 - NiCuNi Plated

    32mm Hook Magnet, NdFeB Grade N38, Nickel Plated Learn More
  11. D1803

    D1803

    D18x3mm N38 NiCuNi Plated Disc Magnet

    18mm dia. x 3mm thick Neodymium Disc Magnet - NdFeB N38 - NiCuNi Plated - Axially Magnetized through 3mm thickness Learn More
  12. B1212

    B1212

    12 x 12 x 12mm N38 Nickel Plated Block Magnet

    This medium cube can hold up to 15 lbs. It is strong enough to pinch little fingers. This one is a good choice if you are looking for a durable, light duty magnet to have at the office or the home. Learn More
  13. strong gold plated rare earth magnet with dimple marking North pole

    D095015G-N45

    D9.5x1.5mm N45 Gold Plated Disc Magnet

    A strong medium sized disc magnet with gold plating and a dimple marking the North pole. Learn More
  14. C1225

    C1225

    D12 x 25mm N38 NiCuNi Plated Cylinder Magnet

    A good sized cylinder magnet that is a little bit less than 1/2 inch in diameter x 1 inch long. Like all cylinders, this one is best used when you need a deep magnetic field and not merely holding power. Learn More
  15. CSR1809

    CSR1809

    D18-3.5x9mm N38 NiCuNi Plated Countersunk Ring Magnet

    A thicker version of one of our most popular magnets. The CSR1809 has a countersunk hole sized for a #6 machine or wood screw. This one is easy to securely mount in a variety of mediums. Perfect for latches, lock downs, tools, alignment and more. We keep large quantities in stock. The picture shown is a thinner version of this magnet. The only difference between the two is the thickness. The CSR1809 is more than twice as thick as the one in the picture Learn More
  16. MR20

    MR25

    D25-5.5x8mm N38 NiCuNi Plated Countersunk Cup Magnet

    This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More
  17. 3mm rare earth disc magnet for crafts

    D0301

    D3x1.5mm N38 NiCuNi Plated Disc Magnet

    One of our most popular magnets. This small disc weighs about .08 grams and holds about 114 grams (1/4 lb.) That means it can hold well over a thousand times its own weight. Perfect for art projects, miniature models, or faux jewelry. Learn More
  18. B5012

    B5012

    50 x 25 x 12mm N38 Nickel Plated Block Magnet

    50mm long x 25mm wide x 12mm thick Neodymium Block Magnet - NdFeB N38 - Nickel Plated - Magnetized through 12mm thickness Learn More
  19. C0309

    C0309

    D3 x 9mm N38 Nickel Plated Cylinder Magnet

    Great crafts and small projects. This one is easy to handle and will not pinch at all. It is not quite strong enough to be a great fridge magnet, but jewelers and woodworkers will find it is a great size and strength for most small jobs. Learn More
  20. MH20

    MH20

    20mm Hook Magnet - N38 - NiCuNi Plated

    20mm Hook Magnet, NdFeB Grade N38, Nickel Plated Learn More
  21. D1502

    D1502

    D15x2mm N38 NiCuNi Plated Disc Magnet

    $0.60

    15mm dia. x 2mm thick Neodymium Disc Magnet - NdFeB N38 - NiCuNi Plated - Axially Magnetized through 2mm thickness Learn More
  22. 4x2mm nickel plated rare earth disc magnet

    D0402-N42

    D4x2mm N42 NiCuNi Plated Disc Magnet

    4x2mm magnet in grade N42 with a Nickel finish. Learn More
  23. 4x Nickel Plated Disc Magnet

    D04015

    D4x1.5mm N38 NiCuNi Plated Disc Magnet

    A small handy magnet. Suitable for crafts, sensors, jewelry, and modeling. Learn More
  24. S18

    S18

    D18mm N38 Nickel Plated Sphere Magnet

    These are very strong and will hurt your hands if not careful. Learn More
  25. C0909

    C0909

    D3/8 x 3/8" N38 Nickel Plated Cylinder Magnet

    This 3/8" x 3/8" (.375 x .375) is easy to handle, great for crafting wood working, plastics, office cubicles, and more. It wont pinch your fingers and it can hold around 10 lbs. Learn More
  26. R1803U

    R1803U

    D18-6.5x3mm N38 No Plating Ring Magnet

    18mm dia. x 6.5mm inner dia. x 3mm thick Neodymium Ring Magnet - NdFeB N38 - Un-Plated - Axially Magnetized through 3mm thickness Learn More
  27. D3706ABS-N42

    D3706ABS-N42

    D37x6mm N42 Plastic Coated Disc Magnet

    These discs are protected by a thick plastic coating. They work very well in salt water and other harsh environments. The picture to the left is a similar but not identical magnet. It will be updated asap. Learn More
  28. B0606

    B0606

    6 x 6 x 6mm N38 Nickel Plated Block Magnet

    $0.38

    This small cube magnet is another good all purpose size. It is a shade less than 1/4" and can hold up to 3 lbs. The poles are on opposite sides of the cube. Learn More
  29. D4x2mm N42 Gold Plated Disc Magnet

    D0402G

    D4x2mm N42 Gold Plated Disc Magnet

    Small 4x2mm Gold plated disc magnet that is useful for crafts, small woodworking projects, and jewelry. Learn More
  30. C0202

    C0202

    D2 x 2mm N38 Nickel Plated Cylinder Magnet

    2mm dia. x 2mm thick Neodymium Cylinder Magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 2mm thickness Learn More
  31. MR42

    MR42

    D42-6.5x9mm N38 NiCuNi Plated Countersunk Cup Magnet

    This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More
  32. D1203E-N42

    D1203E-N42

    D12x3mm N42 NiCuEpoxy Coated Disc Magnet

    Another handy size. Less than 1/2 inch in diameter and can hold around 14 lbs. Useful for a multitude of applications including LED throwies. Good for woodworking, crafts, and sewing with light denim. This magnet is triple coated with Nickel, Copper and Epoxy for more effective water resistance. Learn More
  33. D5x1mm N52 Gold Plated Disc Magnet

    D0501G-N52

    D5x1mm N52 Gold Plated Disc Magnet

    5mm diameter x 1mm thick. Magnetized through the 1mm. Quality 24kt Gold plated. Very nice uniform magnets. Strongest Grade N52. Learn More
  34. B120501

    B120501

    12 x 5 x 1.5mm N38 NiCuNi Plated Block Magnet

    This thin rectangular plate magnet is perfect for sewing into light fabrics. The large 5x12mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This one can hold up to 6 lbs. Learn More
  35. 8x2mm black epoxy coated rare earth magnet (disc)

    D0802E-N42

    D8x2mm N42 NiCuEpoxy Coated Disc Magnet

    Black epoxy coated disc magnet. Holds over 4 lbs. Perfect for woodworking, plastics, etc. Learn More
  36. C0609K

    C0609K

    D6 x 9mm N38 Plastic Coated (Black) Cylinder Magnet

    This small plastic coated magnet is perfect for office organization, magnetic white boards and crafts. Available in seven different colors, it is great for color coding your calendar or organizing documents on your magnetic white board. Since the entire magnet is coated with plastic, these magnet are very durable and will not chip or break from use. Actual dimensions with plastic coating are 7.5mm diameter x 10.0mm thick. Allow +/- 0.1mm. Learn More
  37. R1203

    R1203

    D12-3.5x3mm N38 NiCuNi Plated Ring Magnet

    This medium sized ring magnet. This one works well with our C0309 to make a cool miniature gauss gun. This rings is also the same size as our D1203, with ad 3.5mm center hole. It can hold about 10 lbs. Learn More
  38. D2506
  39. Small nickel plated rare earth magnet 6mm plate

    B0601

    6 x 6 x 1.5mm N38 Nickel Plated Block Magnet

    This thin plate magnet is perfect for sewing into light fabrics. The 6x6mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This is our smallest plate magnet available. Learn More
  40. B2525

    B2525

    25 x 25 x 25mm N38 Nickel Plated Block Magnet

    Do not under estimate the power of this large cube magnet. With a holding capacity of up to 70 lbs, this magnet is definitely not for the un-initiated. This one creates a very deep magnetic field that is perfect for detecting metal studs in the wall, building particle accelerators, or very large halbach arrays for your maglev train. Magnets this large can be dangerous and should always be handled with thick leather gloves. This magnet is very difficult to control and easy to break. It is not recommended for day to day handling and experimentation. The B2525 can hold up to 70 lbs. Learn More
  41. medium black epoxy coated disc magnet

    D1002E-N42

    D10x2mm N42 Epoxy Coated Disc Magnet

    10mm diameter x 2mm thick Neodymium Disc Magnet - NdFeB N42 - Epoxy Coated - Axially Magnetized through 2mm thickness Learn More
  42. MR20

    MR20

    D20-4.5x7mm N38 NiCuNi Plated Countersunk Cup Magnet

    This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More
  43. CSR2506

    CSR2506

    D25-4x6mm N38 NiCuNi Plated Countersunk Ring Magnet

    25mm dia. x 4mm inner dia. x 6mm thick (with 8mm dia. x 3mm deep countersink) Neodymium Countersunk Ring Magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 6mm thickness Learn More
  44. 4x2mm nickel plated rare earth disc magnet

    D0402-N35

    D4x2mm N35 NiCuNi Plated Disc Magnet

    N35 is the weakest NdFeB grade available. The N35 and N50 grades of the 4x2 disc magnet were requested specifically for rubik's cube modifications by magnetic cubing expert DMCubing. Check out his channel for great instructional videos on how to upgrade your cubes with some rare earth magnets! Learn More
  45. 4x1mm nickel plated disc magnet

    D0401

    D4x1mm N38 NiCuNi Plated Disc Magnet

    $0.09

    A small thin rare earth magnet that works great for paper crafts, modeling, figurines, sensors and jewelry Learn More
  46. S06

    S06

    D6mm N38 Nickel Plated Sphere Magnet

    6mm dia. Neodymium Sphere Magnet - NdFeB N38 - Nickel Plated - Magnetized through 6mm diameter Learn More
  47. C0606

    C0606

    D6 x 6mm N38 NiCuNi Plated Cylinder Magnet

    Another extremely useful magnet. This one is about 1/4" x 1/4" and can hold up to 1.5 lbs. Use this one in small woodworking and plastics projects. Learn More
  48. R0602

    R0602

    D6-3.5x2mm N38 NiCuNi Plated Ring Magnet

    $0.14

    This small ring is similar to our D0602 and our R0606. It fits around a smaller cylinder magnet to create some interesting effects. This magnet is easy to handle, and holds about 1/4 lb. Learn More
  49. D1806

    D1806

    D18x6mm N38 NiCuNi Plated Disc Magnet

    18mm dia. x 6mm thick Neodymium Disc Magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 6mm thickness Learn More
  50. 1.5 x 1.5 x 0.75mm N38 Nickel Plated Block Magnet

    B015075

    1.5 x 1.5 x 0.75mm N38 Nickel Plated Block Magnet

    An extremely tiny square magnet. Approximately 1/16th of an inch wide by 1/32" thick. The poles are located on the 1.5 x 1.5mm surfaces. Learn More
  51. B1212E-N42

    B1212E-N42

    12 x 12 x 12mm N42 NiCuEpoxy Coated Block Magnet

    This medium cube can hold up to 15 lbs. It will take a little effort to separate two of them that are stuck together. Learn More
  52. D0902

    D0902G

    D9x2mm N48 Gold Plated Disc Magnet

    An incredibly strong N48 disc magnet with gold plating. These can be difficult to separate. Learn More
  53. C1818

    C1818

    D18 x 18mm N38 Nickel Plated Cylinder Magnet

    This chunky 3/4 inch magnet is a great industrial magnet. With nearly 30 lbs of holding strength and a large field size, this one is perfect for magicians, carpenters, and light industrial applications. This one can definitely pinch. Learn More
  54. R2506

    R2506

    D25-12.5x6mm N38 NiCuNi Plated Ring Magnet

    This large ring magnet is roughly the same size as our D2506 disc magnet with a 12.5mm center hole. It can hold a 1/2 inch steel plate with about 20 lbs of force. Learn More
  55. 6x1.5mm gold plated magnet with dimple marking pole location

    D06015G-N42DN

    D6x1.5mm N42 Gold Plated Disc Magnet - North Pole Marked

    Perfect for magnetic therapy. A small dimple marks the North Pole. This magnet is used by Return to Health clients. Learn More
  56. 3x1.5mm black epoxy coated disc magnet

    D03015E-N42

    D3x1.5mm N42 NiCuEpoxy Coated Disc Magnet

    This is the same size as our D0301 and D0301G disc magnets. Learn More
  57. D6x1mm N48 Gold Plated Disc Magnet

    D06010G-N48

    D6x1mm N48 Gold Plated Disc Magnet

    A very high grade magnet for a little extra strength. Good for jewelry and magnetic therapy applications. Learn More
  58. C0318

    C0318

    D3 x 18mm N38H NiCuNi Plated Cylinder Magnet

    Great crafts and small projects. This one is easy to handle and will not pinch at all. It is not quite strong enough to be a great fridge magnet, but jewelers and woodworkers will find it is a great size and strength for most small jobs. Learn More
  59. MH25

    MH25

    25mm Hook Magnet - N38 - NiCuNi Plated

    25mm Hook Magnet, NdFeB Grade N38, Nickel Plated Learn More
  60. D1506

    D1506

    D15x6mm N38 Nickel Plated Disc Magnet

    15mm dia. x 6mm thick Neodymium Disc Magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 6mm thickness Learn More

Items 1 to 60 of 87 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Ascending Direction