Questions? Call us toll free 1-866-840-4400
Fax (360) 350-6307

    • Thank you for your subscription.

Blocks

13 Item(s)

per page

Grid  List 

Set Ascending Direction
  1. B5012

    B5012

    50 x 25 x 12mm N38 Nickel Plated Block Magnet

    50mm long x 25mm wide x 12mm thick Neodymium Block Magnet - NdFeB N38 - Nickel Plated - Magnetized through 12mm thickness Learn More
  2. B2525

    B2525

    25 x 25 x 25mm N38 Nickel Plated Block Magnet

    Do not under estimate the power of this large cube magnet. With a holding capacity of up to 70 lbs, this magnet is definitely not for the un-initiated. This one creates a very deep magnetic field that is perfect for detecting metal studs in the wall, building particle accelerators, or very large halbach arrays for your maglev train. Magnets this large can be dangerous and should always be handled with thick leather gloves. This magnet is very difficult to control and easy to break. It is not recommended for day to day handling and experimentation. The B2525 can hold up to 70 lbs. Learn More
  3. B1818

    B1818

    18 x 18 x 18mm N38 Nickel Plated Block Magnet

    This magnet is approximately 3/4 inch cube. Learn More
  4. B1212E-N42

    B1212E-N42

    12 x 12 x 12mm N42 NiCuEpoxy Coated Block Magnet

    This medium cube can hold up to 15 lbs. It will take a little effort to separate two of them that are stuck together. Learn More
  5. B1212

    B1212

    12 x 12 x 12mm N38 Nickel Plated Block Magnet

    This medium cube can hold up to 15 lbs. It is strong enough to pinch little fingers. This one is a good choice if you are looking for a durable, light duty magnet to have at the office or the home. Learn More
  6. B120601

    B120601

    12 x 6 x 1.5mm N38 NiCuNi Plated Block Magnet

    This thin rectangular plate magnet is perfect for sewing into light fabrics. The large 6x12mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This one can hold up to 6 lbs. Learn More
  7. B120501

    B120501

    12 x 5 x 1.5mm N38 NiCuNi Plated Block Magnet

    This thin rectangular plate magnet is perfect for sewing into light fabrics. The large 5x12mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This one can hold up to 6 lbs. Learn More
  8. B1201

    B1201

    12 x 12 x 1.5mm N38 Nickel Plated Block Magnet

    $0.45

    This is a thin plate magnet that can be sewn into light fabrics. The large surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This magnet can hold up to 12 lbs. Learn More
  9. B0901

    B0901

    9 x 9 x 1.5mm N38 Nickel Plated Block Magnet

    This thin plate magnet is perfect for sewing into light fabrics. The 9x9mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This little magnet can hold up to 6 lbs. Learn More
  10. B0606

    B0606

    6 x 6 x 6mm N38 Nickel Plated Block Magnet

    $0.38

    This small cube magnet is another good all purpose size. It is a shade less than 1/4" and can hold up to 3 lbs. The poles are on opposite sides of the cube. Learn More
  11. Small nickel plated rare earth magnet 6mm plate

    B0601

    6 x 6 x 1.5mm N38 Nickel Plated Block Magnet

    This thin plate magnet is perfect for sewing into light fabrics. The 6x6mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This is our smallest plate magnet available. Learn More
  12. 1.5 x 1.5 x 0.75mm N38 Nickel Plated Block Magnet

    B015075

    1.5 x 1.5 x 0.75mm N38 Nickel Plated Block Magnet

    An extremely tiny square magnet. Approximately 1/16th of an inch wide by 1/32" thick. The poles are located on the 1.5 x 1.5mm surfaces. Learn More
  13. 3 x 3 x 1.5mm N38 Nickel Plated Block Magnet

    B0303015

    3 x 3 x 1.5mm N38 Nickel Plated Block Magnet

    $0.08

    An extremely tiny square magnet. Approximately 1/8" wide by 1/16" thick. The poles are located on the 3 x 3mm surfaces. Learn More

13 Item(s)

per page

Grid  List 

Set Ascending Direction